Tabla de contenido
Idiomas disponibles
Idiomas disponibles
::: DMC2 Quickstart Guide :::
This Quickstart Guide explains how to quickly setup and begin using the Numark DMC2
Controller. Please take a few minutes to go through this Quickstart and get familiar with the
setup procedure and basic controls.
We have designed the DMC2 as an essential tool for software-based DJs. DMC2 is a HID-
compliant device and can be used with any software which supports the DMC2 protocol.
have included the CUE LE software package for you to begin DJing immediately. We highly
recommend reading the CUE LE Reference Manual included on the installation disc, in order to
take full advantage of this product's features. Happy DJing!
Please check that the following items were included in the box:
•
DMC2
•
USB cable
•
DC power supply (7.5V 1A)
•
CUE LE installation CD-ROM
Please read Safety & Warranty Information before using this product!
CONTROLLER SETUP - PC
DMC2 is a plug-and-play device,
which means that the first time you
connect
the
controller
computer all necessary drivers will
be installed automatically.
Please first power the DMC2 with
the included power supply.
use the included USB cable to
connect the DMC2 controller to an
available USB port on your PC.
Please allow the DMC2 to automatically initialize all the
necessary drivers. When the installation is complete, you will
see "Your new hardware is installed and ready to use"
message, shown on the right. The installation is now complete
and the controller is ready to use.
CONTROLLER SETUP - MAC
Under Mac OS, DMC2 is a plug-and-
play device and will be ready to use
as soon as it is connected.
Please first power the DMC2 with
the included power supply. Please
use the included USB cable to
connect the DMC2 controller to an
available USB port on your Mac.
to
your
Then,
1
We
Tabla de contenido
