Set Up Software; Network Configuration; Get Started With Axis Camera Station - Axis S10 Serie Manual Del Usaurio

Set Up Software

When the computer has been powered on, the Windows operating system will start. Follow the
instructions displayed on the screen and provide the required information. When the Windows
installation is configured, Get Started Application will start automatically. Follow the steps on
the screen.

Network Configuration

AXIS Camera Station can record and play back video from cameras and video encoders that
are connected to a LAN (Local Area Network) or to a WAN (Wide Area Network). Depending
on the installation, follow the instructions under Network & Security Configuration in
AXIS Camera Station User Manual available at www.axis.com

Get Started with AXIS Camera Station

Start AXIS Camera Station Client and the wizard "Get Started with AXIS Camera Station" starts
automatically. "Get Started with AXIS Camera Station" provides a quick way to add cameras and
to configure and enable recording:
1. Register your pre-installed licenses
2. Select cameras and video encoders to add.
3. Select recording methods and where to store recordings.
4. Review settings and click Finish to add cameras.
5. Start recording and viewing with AXIS Camera Station on AXIS S9001 Mk II /
AXIS S9002 Desktop Terminal.
For more information, see the built-in help and AXIS Camera Station User Manual available
at www.axis.com
Specification
Note
Offerings may vary by region. The following specifications are only those required by law to ship
with your computer. For more information regarding the configuration of your computer, click Start
> Help and Support and select the option to view information about your computer
Power
AC Power Supply (per power supply)
Wattage
AXIS Camera Station S10 Recorder Series
AXIS S1032 Mk II
350 W
AXIS S1048 Mk II
495 W
11