Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Note:
Due to shipping requirements the hinge (#18)
may be positioned as shown in Detail A, you will have
to rotate the hinge to the position shown in Detail B.
DO NOT unscrew the hinge, you can rotate the hinge
without unscrewing it from the table.
11. Attach Hinges (#18) to Strut Tubes (#17) as shown in Figure 6 & Detail B.
With hinge positioned as shown, align hole in hinge with hole in Strut Tube
and attach with ¼" Screw (#30), Plastic Washer (#38) and Locknut (#34).
Plastic Washer (#38) goes between Strut Tube and Hinge. Tighten nut
securely. Repeat for other Hinge. CAUTION: Hinges must be positioned
exactly as shown or table will not operate correctly and could be
damaged. DO NOT take hinges off.
12. With at least two adults, repeat steps 8 through 11 for other table top
assembly.
Figure 6
30
17
17
34
38
18
Hinge Assembly
If you want to see a video on how to position hinge (#18) go to:
http://www.escaladesports.com/customer-service/videos.html
Scan with your smartphone:
DO NOT OPEN THE TABLE TO PLAYING
BE KNOCKED OVER CAUSING SERIOUS
30
38
6
Or
POSITION UNTIL BOTH TOPS ARE
INSTALLED! DO NOT LEAVE TABLE
STANDING UNATTENDED. IT COULD
BODILY INJURY OR PROPERTY
DAMAGE.
ATTENTION: If hinge is positioned as
shown below (Detail A), Rotate the hinge as
shown in Detail B. Do not take hinge off.
18
Detail A
Shipping position
of hinge
CAUTION: Position Hinges exactly as
shown in Detail B or table will not operate
correctly and could be damaged.
Detail B
34
18
Assembly
position of hinge
In the correct position Hinge
#18 will look like a "V" when
attached to the strut tube #17.
17
30
38
17
Tabla de contenido
