Equipson MARK M Serie Manual De Uso página 4

EN EN
9. / 10. CH B INPUT You can insert audio signal to channel B using one of these
connectors (XLR 3 or Jack 1/4").
11. / 12. CH A INPUT You can insert audio signal to channel B using one of these
connectors (XLR 3 or Jack 1/4").
13. FAN The device uses fans in order to eliminate the hot excess in the amplifier.
Do not cover these grilles.
14. MAIN SOCKET INPUT Use the incorporated cable in order to connect the device
to an adequeate main supply point.
15. CH B OUTPUT Use these Binding post sockets in order to connect the output B
to the loudspeakers.
16. CH A OUTPUT Use these Binding post sockets in order to connect the output B
to the loudspeakers.
17. CH B OUTPUT Use this NL4 socket in order to connect the output B to the
loudspeakers.
18. CH A OUTPUT Use this NL4 socket in order to connect the output B to the
loudspeakers.
MODEL
POWER OUTPUT (4Ω)
POWER OUTPUT (8Ω)
POWER OUTPUT BRIDGE (8Ω)
FREQUENCY RESPONSE
INPUT SENSITIVITY
SLEW RATE
S/N RATIO
DISTORTION
AC VOLTAGE
DIMENSIONS
WEIGHT
M 450
220W + 220W AES
150W + 150W AES
280W AES
20 Hz - 20 kHz
1.23V
Z 30 uS
> 99 dB
<0.1%
AC 230V / 50-60Hz
483 x 88 x 420 mm
8.9 kg
3 User Manual/Manual de Uso
M 650
320W + 320W AES
220W + 220W AES
360W AES
20 Hz - 20 kHz
1.23V
Z 30 uS
> 99 dB
<0.1%
AC 230V / 50-60Hz
483 x 88 x 420 mm
9.6 kg
M 450 / M 650