Remote Control - König KN-CDPLAY130 Manual De Uso

Item5. REMOTE CONTROL

REMOTE CONTROL

1. Fader start
. Tack
3. Lock
Item6. PROG TRACK CLEAR
PROG TRACK CLEAR
1. NO
. YES
Item7. VERSION
VERSION
SYSTEN VER: 00
MCU VER: 001
DSP VER: 001
MP3 VER: 001
OTG VER: 001
HID VER: 001
14. Seamless Loop
A => A point is able to record during PLAY and PAUSE mode. If B Point is recorded, and A point
re-set behind B-point, B-point will be cleared
B/EXIT
(1) No function if A-CUE is recorded.
() As A-CUE is recorded, press B button to complete Loop setting and start looping. Loop Circle
and text will be completely show.
Press B-Loop/EXIT button as looping, loop stops and A-LED, B-LED, RELOOP-LED stop flashing
and remain light on. Press B-loop/EXIT again to reset B point and looping starts again.
(3) A-Point time must be in front the B Point. If A point time sets after B point, B point will be
canceled.
(4) „mark" shows on the time bar of LCD if B point is set.
A, B, RELOOP-LED flashing (1.0Hz) when looping started.
(5) Reloop: press the button to restart looping.
15. Edit: A/B point Edit (not available at this stage)
During Edit mode, press Edit to start Edit mode and choose A/B point for modification.
A/B LED flashes faster (4Hz) after Edit button pressed and press A/B button to adjust the record
point.
Press Edit button again to confirm the modification.
16. Track Knob/ Menu selection knob
a. In Play/Pause mode: Turn the knob to skip track immediately or press the knob to enter File
Select mode.
b. In Program/file select mode: Turn the knob to select the tracks and press down the knob to
confirm.
c. In Menu mode: Turn the knob to select the menu content and press down the knob to
confirm.
6