Basic Operations - König Electronic SEC-DVR304 Manual De Uso

Before turning on the system
• Install one SATA HDD (Max. storage size 1TB, not included) in the HDD Tray (Sec. 4.5).
• Refer to Sec. 4.5 & 4.6 for all connections.
After turning on the system
• Wait for about 40 seconds for the system to start up.
• Login to the system (Sec. 7.1), and then physically format the HDD (Sec. 7.6.6.1). (Please note that the HDD cannot
be used for recording if it is not formatted yet.)
• Refer to Sec. 7.6.8 and Appendix A to set the time zone of the system.
• Refer to Section 5.1 to enter text.
• Refer to Section 4.5 for all basic operations.
• Refer to Sec. 7.6 to setup the system correctly, esp. Section 7.6.8 for Time Zone, DST & Language.
• Refer to Chapter 10 to search, playback, and archive the recorded video/audio.
• Refer to Sec. 4.2, 7.6.10, and Chapter 11 for remote access via internet or intranet.
• Refer to Sec. 4.2, 7.6.1, 7.6.9, and Chapter 8 to control the PTZ cameras correctly.
• Refer to Sec. 4.2, 4.6, 7.6.9, and Appendix B to use the keyboard controller or terminal correctly.
• Refer to Appendix C & Appendix D or Recording-table.xls for the estimated recording time.
Login to the system
• Login / Logout: MENU->Login/Logout
Setup the system
• Format HDD: MENU->Setup->HDD->Format HDD (MODE)->Physical Format (CALL)
• Change time zone, Language: MENU->Setup->System->Time Zone, Language
• Setup PTZ, keyboard: MENU->Setup->RS-232/422/485->Device Type, ..
• Setup network: MENU->Setup->Network->Net Type, Static IP or PPPoE, ..
• Change network Port: MENU->Setup->Network->Adv.

Basic operations

• Change split window:
• Change live / Playback mode: MODE
• Move focus: , , , 
• Connect / Disconnect backup device : MENU->Backup Device->Connect / Disconnect
• Search/Playback/Archive : Search->Search By Time, Smart Search, ..
• Search by time : Select the start time & video type, and
- Play: / II , MODE, Search
- Backup: 
• Search by event : Select and move to the event, and
- Play: / II
- Backup: 
• Smart Search: Select the camera, area covered by the motion occurred, and start/end time, and press SEARCH or
MODE to search the matched files. Select and move to the file, and
- Play: / II
- Backup: 
• Search Archived File : Connect Backup Device (by pressing ENTER in Device), and select and move to the file, and
- Play: / II
• Backup: Connect Backup Device (by pressing ENTER in Device), and select cameras, end time, etc., and
- Backup: 
- Stop Backup: 
Remote access > Before logging on
• Set the domain name or IP address of the DVR as trusted web site in your I.E., and the (https:) server verification for
trusted web site as unchecked (Tools->Options->Security in I.E.). For I.E. 7, please set the Security level for this zone
to Low.
• If the PC has used I.E. to access earlier software version of DVR, please go to Tools->Options->General in your I.E.
to delete "Temporary Internet files" and all offline contents.
5