Twin Star 33WM280 Instrucciones página 3

4. Place a drop of Wood Glue (O) into
each of the pre-drilled holes on the
bottom edges of the completed Front
Panel Assembly. Then insert one Wood
Dowel (N) into each of the pre-drilled
holes. Attach the completed Front
Panel Assembly to Hearth/Base. Insert
a Bolt (L) and Washer (M) into the
pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
5. Locate Left Side Panel (E), and place a
drop of Wood Glue (O) into each of
the pre-drilled holes on the bottom
edge of the panel. Then insert one
Wood Dowel (N) into each of the
pre-drilled holes. Attach the Left Side
Panel (E) to the completed Front Panel
Assembly and Hearth/Base (A). Make
sure the dowels seat into the holes in
the pre-drilled holes in the Hearth/Base
(A). Insert a Bolt (L) and Washer (M)
into the pre-drilled holes in the holes
in the mounting blocks.
HAND TIGHTEN ONLY.
6. Locate Right Side Panel (F), and place a
drop of Wood Glue (O) into each of
the pre-drilled holes on the bottom
edge of the panel. Then insert one
Wood Dowel (N) into each of the
pre-drilled holes. Attach the Right Side
Panel (F) to the completed Front Panel
Assembly and Hearth/Base (A). Make
sure the dowels seat into the holes in
the pre-drilled holes on the
Hearth/Base.(A). Insert a Bolt (L) and
Washer (M) into the pre-drilled holes
in the mounting blocks.
HAND TIGHTEN ONLY.
7. Locate Mantel/Top (G) and lay finished
side up on top of the completed
assembly. From the inside attach the
Mantel using Bolts (L) and Washers
(M), through the pre-drilled holes on
the side panels.
HAND TIGHTEN ONLY.
E-3
COMPLETED
FRONT
ASSEMBLY
HEARTH/BASE
F
RIGHT
SIDE
PANEL
M
L
N
A
COMPLETED
ASSEMBLY
E
LEFT
SIDE
PANEL
M
L
L
M
N