Installing The Charcoal Filter - Presenza QR045 Guía De Instalación Y Manual Operativo

Installation (continued) Installation

INSTALLING THE CHARCOAL FILTER

(SKIP THIS STEP IF YOU ARE USING EXTERIOR VENTING)
NOTE:
The charcoal filter should only be installed if you are not using an external venting system.
- Turn over the range hood (A) and place its top on a protective surface .
- Unhook the charcoal filter support (9) from the support hook (10) and pull the charcoal filter support up.
- Place the charcoal filter (B) under the charcoal filter support (9). Ensure that the filter is placed horizontally, or the charcoal filter
support (9) will not close properly.
- Slide the charcoal filter support (9) to the left or right in its braces (11) until you can re-hook it on its support hook (10).
B
10
A
Please contact [email protected] or 1-877-333-0098 for further assistance .
9
B
10
11
9
11
11 CONGLOMKB .COM