Setting The Alarm Clock - MABIS Deluxe SmartRead Manual De Instrucciones

Setting the Alarm Clock

Your automatic digital blood pressure monitor features an alarm clock. The
alarm can be set to ring at three different times in the day. The alarm is
especially helpful if you are required to measure your blood pressure at
specific times (for example: 7:00 a.m., 12:00 p.m. and 10:00 p.m.)
To set the alarm clock:
1. Press the Alarm button located between the 'SET' button and the
POWER button to enter into the alarm mode.
2. Continue to press the Alarm Button to select the alarm to adjust,
Figs. 1-3.
Fig. 1
Fig. 3
Fig. 2
10
3. With the chosen alarm screen displayed, the
hour will begin to flash at the top of the
screen, Fig. 4. Press the 'MEM' Button to change
the hour. Once the correct hour is displayed,
press the 'SET' Button to confirm.
4. After the hour is confirmed, the minutes will
begin to flash, Fig. 5. Press the 'MEM' Button to
change the minutes. Once the correct minutes
are displayed, press the 'SET' Button to confirm.
Fig. 5
5. The alarm feature must be turned on immediately after setting the time
for the alarm. Press the 'MEM' Button to turn the alarm on, Fig. 6. Press
the 'MEM' Button a second time to turn the alarm off, Fig. 7.
6. Press the POWER Button to turn the unit off.
Fig. 4
Fig. 7
Fig. 6
11