Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CÓDIGO
DESCRIÇÃO DAS PEÇAS
1 - 07316 - TAMPA LATERAL ESQ CL 300SL 400 X 301MM
2 - 00177 - CORREIA Z-675
3 - 00022 - ROLAMENTO 6002 ZZ
4 - 00970 - ANEL ELASTICO I 32
5 - 70314 - CORRENTE CL 350/300/2
6 - 02198 - MANCAL MOVEL ESQ CL 300 SUPER/US
7 - 02194 - FUSO HELICOIDAL ESQ CL 300S/CL 350 65MM
8 - 07379 - CONJ ENGRENAZEM Z40 CL 300SL
9 - 07381 - CONJ POLIA TRANSM EMF 10
10 - 0730 - 5ESTICADOR CORREIA CL 300SL 124 X 45MM
11 - 00590 - ROLAMENTO 6003 ZZ
12 - 00590 - ROLAMENTO 6003 ZZ
13 - 02184 - MANCAL LAT ESQ CL 300 SUPER/US
14 - 00019 - ROLAMENTO 6204
15 - 00971 - ANEL ELASTICO I 47
16 - 07301 - POLIA DO MOTOR CL 300SL 61MM
17 - 70314 - CORRENTE CL 350/300/2
18 - 00019 - ROLAMENTO 6204
19 - 07365 - ESPACADOR DA POLIA EMF 10 16,8MM
20 - 00969 - ANEL ELASTICO E 20
21 - 07378 - CONJ ENGRENAGEM POLIA EMF 10
22 - 07348 - CONJ LATERAL ESQUERDA CL 300SL
23 - 07312 - TAMPA TRASEIRA CL 300SL 342 X 260MM
24 - 07306 - BASE MOTOR CL 300SL 338 X 235MM
25 - 00001 - MOTOR MONOF 1/2 P4 11/22 60HZ
26 - 07347 - CONJ RASP INF CL 300 SL
27 - 07303 - CONJ CILINDRO INFERIOR CL 300SL
28 - 00994 - CHAVETA 06 X 06 X 20 QUADRADA
29 - 02185 - CONJ EIXO ESQ CL 300 SUPER
30 - 01790 - CONJ CILINDRO SUPERIOR CL 300
31 - 07321 - CONJ RASPADOR SUP CL 300SL
32 - 01819 - HASTE FIXACAO LAT CL 300 305MM
33 - 07318 - SUPORTE ROLO MASSA CL300SL 150 X 55MM
UTILI TÁRIO RE F.: CL 300 SL
CÓDIGO
DESCRIÇÃO DAS PEÇAS
34 - 07320 - RODINHA DO ARRAMADO CL 300SL 8MM
35 - 00993 - CHAVETA 06 X 06 X 12 QUADRADA
36 - 02186 - CONJ EIXO DIR CL 300 SUPER
37 - 00993 - CHAVETA 06 X 06 X 12 QUADRADA
38 - 00372 - MOLA RASPADOR CL 300 55 X 13 X 1,5
39 - 07308 - BANDEJA SUP CL 300SL 736 X 296MM
40 - 07320 - RODINHA DO ARRAMADO CL 300SL 8MM
41 - 70253 - PROTECAO ARAMADO CL 300 SL
42 - 02450 - CONJ ROLO PVC CL 300S/CL 350
43 - 07304 - PROTECAO SUP CL 300SL 330 X 222MM
44 - 00375 - PE BORRACHA REF 314
45 - 02499 - CHAVE BIVOLT
46 - 03914 - CHAVE L/D 29123 M4FT1EE3G UNIP 15A
47 - 07349 - CONJ LATERAL DIREITA CL 300SL
48 - 00197 - MOLA ESTIC CORRENTE CL 300 46 X 14 X 2,25
49 - 07322 - EST CORRENTE CL 300SL
50 - 07323 - SUPORTE MICRO CHAVE CL 300SL 73 X 30MM
51 - 00372 - MOLA RASPADOR CL 300 55 X 13 X 1,5
52 - 00396 - CHAVE MICRO INTERRUPTOR TM 1307 FTG 300
53 - 00017 - ROLAMENTO 6000 ZZ
54 - 07317 - CONJ ENGRENAGEM Z 16 CL 300SL
55 - 00590 - ROLAMENTO 6003 ZZ
56 - 00201 - ENGRE TRANSM F17 11 DENTES CL 300
57 - 00019 - ROLAMENTO 6204
58 - 00202 - ENGRE TRANSM F18 11 DENTES CL 300 20MM
59 - 02183 - MANCAL LAT DIR CL 300 SUPER/US
60 - 02197 - MANCAL MOVEL DIR CL 300S USINADO
61 - 02193 - FUSO HELICOIDAL DIR CL 300S/CL 350 65MM
62 - 01815 - ESPAC 17 X 11,5 CL 300 10MM
63 - 00719 - CORRENTE 1/2 X 1/8
64 - 07315 - TAMPA LATERAL DIR CL 300SL 400 X 301MM
65 - 03428 - CONJ MANIP CL 350/CL 390
10
CL 300 SL LAMINATING CYLINDER
1.1. Manufacture in steel (1020) plate with epoxy finishing and cabinet completely closed.
1.2. This equipment conforms ABNT safety norms.
1.3. The CL 300 SL cylinder maximum rolling out capacity is 2 Kg of dough. Exceeding this
limit may reduce the components durability.
1.4. Electrostatic painting (epoxy) and stainless steel with chromed cylinders as optional.
1.5. Steel-plated roller bearings are used in its manufacturing.
2.1. Before installing your machine, check if the voltage conforms your mains supply:
110/220V for the single phase equipment and 220/380V for the three phase equipment.
2.2. Install your equipment on a flat surface.
2.3. Always remember to connect the earth wire.
CL 300 SL
3.1 This cylinder has been developed to roll out dough and to make bread dough.
3.2 Practical cylinder(roller)opening system, simply operated through the frontal flywheel with
visual indication.
4.1 Before cleaning your equipment, make sure it is disconnected from the mains supply.
4.2 Use a damp cloth for cleaning the machine.
4.3 Dry well the cylinders(rollers) after cleaning the equipment.
4.4 Don't pour water over the equipment when cleaning it.
5.1. If your equipment is not working according to its specifications, have the till receipt and
Instructions Manual at hand and contact G.Paniz Customer Service, and we'll inform you
about the nearest Authorized Service Center.
5.2 CL 300 SL cylinder does not need lubrication.
7
Tabla de contenido
