Tabla de contenido
Idiomas disponibles
Idiomas disponibles
COLORband™ PiX QRG
Menu Options
Main Level
Static Colors
Auto Programs
Program Speed
Slave Mode
Custom Color
Mixing
DMX
Personalities and
Starting Address
DMX Linking
Starting Address
Master/Slave
Connection
Fuse Replacement
Programming Levels
C--
P--
S--
S001-S100
SLA
U--
3-CH
4-CH
6-CH
7-CH
d001-d512
9-CH
12-CH
18-CH
36-CH
The COLORband™ PiX can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 477.
The COLORband™ PiX uses the DMX data connection for its Master/Slave
mode. Instructions for connecting and configuring this product for
Master/Slave operation are in the User Manual.
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse
holder.
3.
Pry the safety cap out of the housing.
4.
Remove the blown fuse from the clip on the front of the safety cap
and replace with a fuse of the exact same type and rating.
5.
Re-insert the fuse holder and reconnect power.
C1
Red
C2
Green
C3
Blue
C4
Cyan
C5
Magenta
C6
Yellow
C7
White
P1
7-Color Switching
P2
7-Color Fading
P3
3-Color Switching
P4
3-Color Fading
P5
Chase Program
P6
7-Color Sound-Active
P7
7-Color Sound-Active Chase + Strobe
Selects Auto Program Speed
Sets Slave Mode
r--
Red
g--
Green
b--
Blue
Selects DMX personality and starting
address
5
Description
EN
Tabla de contenido
