Premier SCR-2067TFT Manual De Instrucciones página 45

BASIC OPERATION
BLUETOOTH CAR KIT USER MANUAL
1. "Pair" To Your Bluetooth Phone
Prior to using the Car Kit for the fist time, you must pair it with a Bluetooth-enabled
mobile handset.
The following steps describes pairing the instruction for a typical Bluetooth-
enabled mobile handset.
1). Place the Car Kit and mobile handset in 3 meters apart.
2). Put the Car Kit in pairing mode.
Press the POWER button to turn ON, the
Press and hold the "PAIR/
now ready for pairing. (If you want not to pair, please press it longer again.)
3). Set your bluetooth phone to "discover" the Car Kit .
Following your phone's instruction guide for details, active your mobile handset's
Bluetooth function, the handset will search for accessible Bluetooth devices.
4). Your phone will find this Car Kit .
Select this Car Kit from the list.
5). Enter passkey "8888", then press "OK" to pair the Car Kit and the handset,
the word "PAIR OK, PLEASE CONNECT" will display in the TFT .
6). Select the "CONNECT" from the list on the phone,
if you connect successfully , the
can operate the function of blue-tooth about the unite .
Important:
a. If the pairing can not be completed within approximately 2 minutes , whiles
the pairing mode is actived, and you will need to reattempt pairing
(See steps 2-5 above) .
b. After pairing is completed, if the
follow the steps to to reattempt pairing through your handset until the
remains solid on the screen.
2. Using The Bluetooth Car Kit.
Once connecting is complete, you may access the following function. Some of the
below mentioned functions only accessible for handset supported with hands-free
profile.
Answer a call
After you hear the ring tone (the incoming telephone number will display on the
TFT LCD), press the " "button briefly on the front panel to listen . (During talking,
if you want to use your phone to listen, please press it button)
Make a call
Press and hold the "
"DIAL NUMBER" will display on the TFT, then you dial the number on the remote
control and then press briefly the "
When you dials the wrong number, press "
End/Reject a call
In Bluetooth menu, press the "
control , the TFT LCD display "CALL HOOKED/CALL EJECTED" .
Redial last number
In Bluetooth menu, press and hold the " " button(approximately 2 seconds) on the
front panel or on the remote control, the "DIAL LAST CALL/DIAL OUT NOW " will
display on the TFT LCD.
Page 16
All manuals and user guides at all-guides.com
" button until the word "
ICON remains solid on the screen , then you
ICON is stilling flash on the TFT , please
" button on the front panel or remote control, the word
" button .
" button briefly on the front panel or on the remote
WWW.PREMIERMUNDO.COM WWW.PREMIERMUNDO.COM
ICON will flash on the TFT .
PAIRING NOW
" button to delete it.
" display, it's
ICON