Lorell LLR81950 Manual Del Usuario

LLR81950/81951/81965
Grommet Type
Clamp Type
Step 1:
Unscrew hand-turn screw and separate hand-turn screw and long metal plate from the mount.
Service Kit (#52487)
Step 2:
Depends on the desk thickness, assemble 2 pieces of metal clamp at suitable screw holes with 4 screws
(M5 x 15mm, Round Head, Philips Drive).
M6 x 14mm
Step 3:
Get screws (M4 x 15mm, round head, philips drive), male & female round washers from service kit.
Pole with Clamp/Grommet Attachment
Hole dia.
3"
Table Thickness
¾"-1¾"
Remark
Desk thickness >50mm (1.97"), refer to chart A left.
Desk thickness <50mm (1.97"), refer to chart B left
User's manual
Table Thickness
¾"-1¾"
Screw M4 x 15mm, Round Head, Philips Drive
Male Round Washer
Female Round Washer
Metal C Clamp (L)
Metal C Clamp (S)
Screw M6 x 14mm, Round Head, Philips Drive
Screw M5 x 14mm, Flat Head, Hex Socket Screw
User Manual
1
1
1
1
1
4
4
1