Troubleshooting - Optelec ClearReader+ Manual Del Usuario

Optelec

7. Troubleshooting

If the power supply does not power the ClearReader
 Check the connections. Make sure that the power supply is firmly connected to the
ClearReader
 If the power supply still does not power the unit, contact your Optelec distributor.
If the battery does not power the ClearReader
 The battery may be empty. Connect the power supply to charge the battery.
If the text you are reading does not make sense.
 Make sure your reading language is the language of your document.
If the text recognition takes unusually long before starting to read your document.
 Make sure your reading language corresponds with the language of your document.
+
If the ClearReader
 The automatic column recognition may be on. Press and hold the Scan button for 2
seconds to disable the column recognition and to switch to "TableMode".
+
If the ClearReader
 Open the camera arm and try it again.
 If the Scan button still does not respond, check if the unit is powered.
+
If the ClearReader
 Make sure the battery is not empty. If the battery is empty, connect the power supply to
charge the battery.
English
+
and to the power outlet.
does not read the whole line of a document / column / table.
does not respond to the Scan button.
does not respond to any button.
+
.
+
.
+
ClearReader
54