Idiomas disponibles
Idiomas disponibles
Press "CHANNEL" button (B6) to view the 3 Channels' temperature. The sequence is shown
as follow:
Press
"CHANNEL" button
Hold " CHANNEL" (B6) button for 3 seconds to cancel unused channel. It will automatically
register a new channel again if a new channel is received.
If there is no temperature displayed in existing channel (" - - . –" is displayed on the LCD ),
hold "CHANNEL" button (B6) for 3 seconds to cancel that channel and receive the channel
again ("Beep" sound can be heard.) Then, press " TX " button (D7) on the thermo sensor unit
to transmit signal to the main unit manually
The trend pointer displayed (A2) indicates the trend of the outdoor temperature.
"
"
" indicates the outdoor temperature is steady.
"
" indicates the outdoor temperature is decreasing.
Press " °C /°F" button (D6), on the Thermo Sensor unit, to select Temperature to be displayed
in Celsius mode or Fahrenheit mode.
The use of 1.5m cord Temperature Probe:
Insert the Sensor probe (D9) to the right hand side of the Thermo Sensor Unit.
Put the metal casing outside and leave the Thermo Sensor Unit in an indoor area to avoid
freezing up the battery when the outdoor temperature is below -20 °C.
Always use the temperature probe to sense the temperature when the temperature is between
the following range:
-50 °C ~ 0°C and +50°C ~ + 70°C
Manual Time Setting:
Hold " MODE" button (B3) for 3 seconds to enter Clock/Calendar setting Mode .
Press "+" (B2) or "-" (B4) buttons to adjust the setting and press "MODE" button (B3) to
confirm each setting.
Press
"CHANNEL" button
" indicates the outdoor temperature is increasing.
Press
"CHANNEL" button
Display the three
channels alternatively
8
