Remote Control Transmitter - Alpine SEC-100S Manual De Operación

4
5
(SEC-RC001 Remote Control)
6
1
3
2
Remote Control
Transmitter
Two Four-Button Remote Control
Transmitters (part number SEC-RC001) are
provided with the SEC-100S/150R Security
System. The SEC-RC001 Remote Control
allow the arming, disarming, panicking, and
EXT activation of the SEC-100S/150R
Security System from a remote location. In
addition, the SEC-RC001 will also allow you
to control a second security system.
Following is a brief description of the
functions of each of the components of the

remote control transmitter:

1. LED Indicator
The blue LED will illuminate when the
signal is being transmitted.
2. TX/PANIC Button
Press this button to:
1. Arm and Disarm the system.
2. Panic the system.
3. EXT1/VALET Button
Press this button to:
1. Activate the EXT1 output.
2. Place the system in Valet mode.
4. EXT2/EXT3 Button
Press this button to:
1. Activate the EXT2 output.
2. Activate the EXT3 output.
5. MODE Button then TX Button
Press the MODE button followed by the
TX button (within 5 seconds) to silently
Arm and Disarm the system.
While the system is armed, press the
MODE button twice to activate the car
finder feature.
While the system is alarming, press the
MODE button to silence the alarm . The
system will remain armed.
NOTE:
Consult your Alpine dealer to determine if
your second security system is compatible
for two car operation.
English