Using Your Radio - TruTalk TK14 Manual Del Usuario

USING YOUR RADIO

Turning the Radio ON - Press and hold the PWR
(power) button on the front of the TK14 for approximately
2 seconds. A tone series will indicate the unit is receiving
power. The radio's LCD panel will make a 2-second self-
test and then go into operational mode. The operational
mode LCD appears like this:
Turning the Radio OFF -
Press and hold the power
button again for approximately
2 seconds. The LCD panel will
go dim to confirm the radio is off.
Adjusting the Speaker Volume - With the radio on,
press the UP (!) button to increase volume; the DOWN
(") button to decrease volume. The volume indicator
icon (lower right position on the LCD panel) will change
according to your setting. Special Note - When using
the ACC-705 ear bud speaker / microphone accessory,
ensure the volume level is at the lowest setting, then
increase gradually until a comfortable level is achieved.
Selecting a Channel - Press and release the MODE
button until the main channel number flashes on the
LCD panel. Select the desired channel by pressing
the UP (!) or DOWN (") buttons. When the desired
channel is displayed, press and release the P-T-T
button to select it. If no selection has been made after
.
10