Cleaning; To Remove Limescale - Pressalit SELECT TL1 Instrucciones De Uso Y Mantenimiento

Cleaning

The product is to be cleaned with hot water or a mild soapy cleaning agent .
A list of suitable cleaning agents tested by Pressalit can be found on
www .pressalit .com .
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent .
• Do not use an autoclave or other type of steam cleaner .
• Avoid aggressive cleaning agents containing acids
• Never spray the product directly with a high pressure cleaner .
• Avoid use of abrasive, corrosive or chlorine-based cleaning or
disinfecting products .

To remove limescale

To remove limescale marks on the aluminium parts, use 3 parts 30%
household vinegar to 7 parts water and afterwards wipe the parts with a cloth
wrung out in clean water .
In countries with relatively high levels of lime in the water supply, it may be
necessary to remove limescale deposits from the aluminium parts using a
de-scaling agent such as acetic acid . Test this first on a area that is not visible
when the product is in use .
CAUTION
!
IMPORTANT
en
17