Sefa ECLAM V3 Serie Guia Del Usuario página 10

2021-03-25
e� Operating cycle
EClam 50 V3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
The cycle can be stopped early by pressing the cycle stop button on the touch screen.
EClam 50 Auto V3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
The cycle can be stopped early by pressing the cycle stop button on the touch screen.
10
Press the main switch at the back of the machine to turn the power on.
Set the temperature.
Set the pressing time.
Set the pressure.
Place the T-shirt on the lower platen.
Position the transfer sheet correctly.
When the heat platen is at the correct temperature, use the handle to
lower it into position.
The timer will start when the platen is lowered.
The press will emit a signal when the countdown has finished.
Open the press using the handle.
Press the main switch at the back of the machine to turn the power on.
Set the temperature.
Set the pressing time.
Set the pressure.
Place the T-shirt on the lower platen.
Position the transfer sheet correctly.
When the heat platen is at the correct temperature, use the handle to
lower it into position.
The timer will start when the platen is lowered.
The press will emit a signal when the countdown has finished.
The platen will open automatically when the countdown has finished.
www.sefa.fr