TEFAL EXPRESS COMPACT GV7080 Manual Del Usuario página 11

1800119351 GV7080 E0 GTK _110x154 13/07/10 09:38 Page8
PROBLEMS
White streaks come
through the holes
in the soleplate.
Brown streaks
come through the
holes in the
soleplate and stain
the linen.
The soleplate is
dirty or brown and
may stain the
linen.
There is no steam
or there is little
steam.
Steam escapes
from the rinse
plug.
The red "water tank
empty" light is on.
Steam or water
escapes under the
appliance.
While ironing your
steam generator
can make a loud
electric pump noise
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
If you have any problems or queries please call our Customer Relations team first for expert
help and advice: 0845 602 1454 - UK / (01) 677 4003 - Ireland
CAUSES
Your boiler has a build-up of scale
because it has not been rinsed
out regularly.
You are using chemical descaling
agents or additives in the water
for ironing.
You are ironing at too high a
temperature.
Your linen is not rinsed sufficiently
or you have ironed a new garment
before washing it.
You are using starch.
The water tank is empty (red light
on).
The soleplate temperature is set to
the maximum.
The rinse plug has not been
tightened correctly.
The rinse plug seal is damaged.
The generator is faulty.
The water tank is empty.
The generator is faulty.
This is normal and is the pump
injecting water into the boiler, or
the steam valve opening.
or consult our website - www.tefal.co.uk
SOLUTIONS
Rinse out the boiler.
Never add this type of product in the
water tank or in the boiler (see § "for
what water may be used"). Contact
an Approved Service Centre.
See our recommendations regarding
temperature control setting.
Ensure linen is rinsed thoroughly to
remove any soap deposits or
chemicals on new garments which
may be sucked up by the iron.
Always spray starch on the reverse
side of the fabric to be ironed.
Fill the tank and press the "Restart"
button until the indicator goes out.
The generator is working but steam
is very hot and dry As a
consequence, it is less visible.
Tighten the rinse plug correctly.
Contact an Approved Service Centre
to order a new rinse plug seal.
Stop using the generator and
contact an ApprovedService Centre.
Press the Restart button on the control
panel until the indicator goes out.
Stop using the generator and
contact an Approved Service Centre.
Refill your water tank (see page 6 for
filling the water tank)
EN
DE
FR
NL
ES
PT
IT
DA
NO
SV
FI
TR
EL
PL
CS
SK
HU
SL
RU
UK
HR
RO
ET
LT
LV
8