Quality Control Tests
Check Strip Test
Check Strip is stored in Carrying Case. Check
Strip Test is used to check that Meter is working
properly.
1. Start with Meter off. Remove
Check Strip from Carrying Case.
Insert Check Strip Contact End
into Test Port with dimple facing
up. Meter turns on.
2. Check Display to make sure that
all segments are showing
(see Display).
3. After a few seconds, the Display
shows
Symbol, and mg/dL.
Caution! If segments are missing from Display,
4. Remove Check Strip. Return to Carrying Case.
Meter turns off.
, Apply Sample
, the Apply Sample Symbol,
and mg/dL does not appear, do not
use Meter for testing.
Call for assistance.
16