Idiomas disponibles
Idiomas disponibles
English
EN
USER WARNINGS
Upon receiving the product, please verify that it doesn't have any type of fl aw, scratch, dent, etc, that it is in perfect
condition, and ready for its installation.
All our products are submitted to a rigorous quality testing system before being supplied.
The installation must be carried out by qualifi ed personnel, and in compliance with current local standards.
The manufacturer refuses any responsibility for inconveniences caused by an improper installation or use.
PRE-INSTALLATION
See pages 3-8.
Sizes in mm.
M: Model (cm) / V: Shipping volume (m
3
) / P: Shipping weight (Kg)
X: Hot water / Y: Cold water / S: Drain
INSTALLATION
See pages 9-11.
1a
Floor siphon /
1b
Wall siphon
Faucetry (OPT) / Overfl ow (OPT) / Valve (OPT)
3
FS22
FS 22 Installation
PRODUCT ADVICE
All products manufactured using Scene Materia fully meet the demands of the bathroom environment thanks to
its non-porous, germ-free surface, easy maintenance, cleaning and resistance to water. Such characteristics are
maintained throughout the entire product, from inside out, ensuring that Scene is a solid, homogenous product that
offers a wide range of benefi ts in the form of surface restoration and repair as well as an avant-garde technological
design solution due to it's warm aspect and ability to produce products of a highly complicated geometrical nature
(For more information please visit our website www.scene.es).
CLEANING
For day-to-day cleaning it is recommended that you use a non abrasive sponge or damp cloth with a ph neutral soap,
multipurpose cleaner or an ammonium based cleaning agent according to the deepness of the clean to be undertaken.
Apply with a multipurpose cleaner and lightly abrasive dual purpose sponge is recommended (similar to those used for
the day-to-day cleaning of crockery) or soft cloth then proceed to rinse with fresh clean water and dry with a soft cloth.
When the need to remove limescale arises we recommend the use of habitual limescale removing creams, leaving it
to act on the limescale for about 1 minute before proceeding to rinse with fresh clean water and dry with a soft cloth.
When the need for a deeper clean arises due to stains such as coffee, permanent marker, grazes, marks left by soft
metals or lit cigarette etc we recommend the use of a lightly abrasive scouring cream (preferably JIF®) alongside
14
a lightly abrasive pan scrub (the more abrasive side of the dual purpose sponge, for example). Pour the scouring
cream onto the surface of the Scene Materia product and, using the pan scrub in a circular motion, scrub the surface
until the stains have been completely removed then rinse with fresh clean water and dry with a soft cloth.
PRECAUTION
Avoid any type of contact with chemically aggressive products (solvents, acids, thinners, bleach, alcohol etc...),
which may cause damage to the surface. Should such contact occur, wash with an abundance of fresh, clean water
and ph neutral soap, then rinse and dry.
Do not use highly abrasive cleaning products other than those recommended as part of our cleaning instructions.
Cleaning related to complements fi tted to scene matería (faucetry, accessories) should be carried out with a non
abrasive soft cloth. Avoid any prolonged contact between Scene Materia and cosmetic products that contain colours,
pigmentation or dyes that could possibly stain the products surface. In case of such contact, clean in accordance
with instructions. Although Scene Materia has a high tolerance to impacts, it is not completely 'indestructible'.
Strong mishandling may cause a complete breakages. Do not over expose Scene Materia products to strong heat
sources such as hair dryers, curling tongs, etc.
SURFACE RESTORATION AND REPAIR WORK
Scene Materia products with smooth fl at surfaces, affected by light marking, stains, dents or scratches that require
repair work to restore their original look can be restored through the use of, fi rstly, P100 grain sandpaper to recover
the required shape or form, followed by grains P200 and P400, respectively to improve the fi nish then, with the
addition of water and the use of P600 sandpaper, restore the area to it's original fi nish. Do not apply this repair
method to textured surfaces. In the case of heavy denting, deep scratching or more heavy damage to the products
surface, which require the addition of extra material or repair work to textured surfaces, request a Scene Materia
repair kit. Should the shower tray suffer any light scratching to it's surface, please order a retouch kit, indicating the
colour, according to the RAL colour chart.
TOXICITY. This product is non-toxic and harmless to humans, animals and the environment.
ECOLOGY. Onde out of service, dispose of the product according to local waste recycling legislation.
CE MARKING
Absara Industrial S.L.
Partida Saloni S/N - 12130 San Juan de Moró (Castellón)
ESPAÑA
18
DoP Nº 0413
FS
Personal Hygiene
EN-14688 CL 00
CA- OF- DA
ABSARA INDUSTRIAL, S.L. reserves the right to make the necessary changes they
feel opportune without forewarning or substitution.
Absara Industrial S.L.
Partida Saloni S/N - 12130 San Juan de Moró (Castellón)
ESPAÑA
18
DoP Nº 0414
FS(Code pedestal)
Personal Hygiene
EN-14688 CL 00
CA- OF- DA
15
