Removing Infant Car Seat; Folding Stroller With Icsa Attached - BOB Single CS1003 Instrucciones

REMOVING INFANT CAR
SEAT FROM STROLLER
Care must be taken when
folding and unfolding the
stroller to prevent finger
entrapment or injury.
NOTE: Refer to Infant Car Seat user guide
for specific instructions.
1. Prepare Stroller
Set parking brake, rotate canopy
towards handlebar (see stroller
owner's manual if necessary).
2. Unfasten Restraint Belt
Unfasten buckle, place Restraint Belt
ends to the sides of stroller seat.
FOLDING STROLLER WITH
ICSA ATTACHED
Care must be taken when
folding and unfolding the
stroller to prevent finger
entrapment or injury.
To avoid injuries, never
fold or unfold stroller
with other individuals
within reach of stroller.
1. Set Parking Brake
Set parking brake (see stroller owner' s
manual if necessary).
2. Unfasten Restraint Belt
Unfasten buckle, place Restraint Belt ends
to sides of stroller seat.
3. Remove Infant Car Seat
Remove Infant Car Seat from ICSA.
4. Empty Stroller
Remove contents from low boy cargo
basket and pockets.
5. Fold Handlebar
Squeeze both handlebar release levers
simultaneously (see stroller owner' s
manual if necessary).
6. Rotate Handlebar Forward
Slightly rotate handlebar towards seat and
hold in place during next step.
7. Lift Red Frame Release Handle
Using a short, quick tug, lift red frame
release handle up. Keep tires on ground
as stroller collapses toward front wheel
(see stroller owner' s manual if necessary).
13
P637200A