Tabla de contenido
Notice
Special features
Always check the product before use and after washing.
Never use a defective product. If the product shows signs of
wear-and-tear, it must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual
handling. Etac offers advice and training for carers.
For further information, contact Etac.
Always use the correct manual handling techniques.
Encourage the user to assist where possible.
To ensure that the user feels safe and that every manual
handling is smooth, always plan the manual handling in
advance.
Material and cleaning
Material:
Butterfly Board:
Fibreglass.
Butterfly GlideWings:
Outer surface: Nylon
Inner surface: Nylon
Filling: Polyester.
The product should be checked regularly, preferably each time it
is used, and especially after washing.
Check that there is no damage to seams or fabric.
Never try to repair a product yourself.
Never use a defective product.
There is a risk that the user may slide off. Never leave
the user alone on the edge of the bed.
Never leave the product on the floor
Always conduct a risk assessment, and ensure that
the assistive product can be used for the individual
user and, in combination with other devices, that it is
safe for the user and carers.
Never use Butterfly under wet conditions as the
underside of the board may become slippery in
contact with water.
Remember to apply brakes to lock bed and
wheelchair.
If in any doubt - please contact Etac.
Washing instructions:
Durig washing the Velcro must be assembled.
Butterfly Board:
Can be wiped with soapy water or disinfectant.
Butterfly GlideWings:
Do not use fabric softener – this will reduce the glide effect.
This product can be cleaned with a solvent-free cleaning agent
with a pH level between 5 and 9, or a 70% disinfection solution.
6
Tabla de contenido
