Technical Features - SCOPREGA GE OV 10 Manual De Instrucciones

DEFLATION MODE
·
Chose the correct inflation valve fitting from the supplied fittings kit.
·
Put the fitting on the adaptor glued onto the hose.
·
Connect the other end of the hose to the inlet port (IN) by means of the adaptor provided.
·
Make sure that the ON/OFF switch is set on (0).
·
Connect the inflator to the power supply and press the ON/OFF switch (I). The deflation starts.
·
Once the inflatable has been emptied, switch the inflator off immediately to prevent motor overheating.
WARNING!
Never leave the unit running unattended. Overinflation may result in serious damages.

TECHNICAL FEATURES:

Supply voltage
Maximum power
Maximum capacity
Maximum pressure
Dimensions
Weight
Supply voltage
Maximum power
Maximum capacity
Maximum pressure
Dimensions
Weight
Supply voltage
Maximum power
Maximum capacity
Maximum pressure
Dimensions
Weight
GE OV 10 - 230V GE OV 10 - 120V
230 Vac ~ 50 Cycles 120 Vac ~ 60 Cycles
1000 W
1700 l/min
250 mbar (3.6 psi)
150 x 160 x 170 (mm)
1.70 kg
GE OV 6 - 230V GE OV 6 - 120V
230 Vac ~ 50 Cycles 120 Vac ~ 60 Cycles
600 W
1600 l/min
175 mbar (2.5 psi)
150 x 160 x 170 (mm)
1.30 kg
GE OV 4 - 230V GE OV 4 - 120V
230 Vac ~ 50 Cycles 120 Vac ~ 60 Cycles
400 W
950 l/min
150 mbar (2.2 psi)
120 x 150 x 145 (mm)
0.90 kg