Attach Mounting Brackets - Whirlpool Gladiator Instrucciones De Instalación

F7
F7 Carriage-head bolt (9)
F8 Washer (9)
Attach to Large GearBox
IMPORTANT: There are holes in back panels (AAA, CCC, and DDD)
to attach the mounting brackets.
1. With the mounting bracket rims pointing down, align the three
bracket holes with the holes in the top back panel (AAA), as
shown.
2. Working from the back, insert carriage bolts (F7) through the
bracket and into top back panel (AAA).
3. Working from the cabinet interior, fasten each bolt with a
washer (F8) and a flange nut (F2). Fully tighten the bolts.
P2
A A A
B B B
A. Bracket rims pointing down
4. Repeat Steps 1 and 2 to attach the center and bottom mounting
brackets to the back of the cabinet.
NOTE: Hand tighten the nuts attaching the center and bottom
brackets. These brackets will need to be adjusted to mount the
cabinet on the wall.

Attach Mounting Brackets

F8 F2
⁵⁄₁₆
F2 " Flange nut (9)
P2
A A A
P1
P1
Attach to Extra Large GearBox
1. With the mounting bracket rims pointing down, align the three
bracket holes with the slots in the top back panel (P9), as shown.
2. Working from the back, insert carriage bolts (F7) through the
bracket and into top back panel (P9).
3. Working from the cabinet interior, fasten each bolt with a
washer (F8) and a flange nut (F2).
NOTE: For the top bracket only, slide the bolts to the top of the
slot before fastening.
4. Fully tighten the bolts.
P 9
P 9
5. Repeat Steps 1 through 3 to attach the center bracket to the
third back panel and the bottom mounting bracket to the fifth
back panel as shown.
NOTE: Hand tighten the nuts attaching the center and bottom
brackets. These brackets will need to be adjusted to mount the
cabinet on the wall.
A
P2
P 9
P1
A. Bracket rims pointing down
P2
P1
A
3