Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2.9
2.9
2.9
Installing Windows 2000 / Windows XP /
Installing Windows 2000 / Windows XP /
Installing Windows 2000 / Windows XP /
2.9
2.9
Installing Windows 2000 / Windows XP /
Installing Windows 2000 / Windows XP /
Windows XP 64-bit Without RAID Functions
Windows XP 64-bit Without RAID Functions
Windows XP 64-bit Without RAID Functions
Windows XP 64-bit Without RAID Functions
Windows XP 64-bit Without RAID Functions
If you just want to install Windows 2000, Windows XP or Windows XP 64-bit on your
SATA / SATAII HDDs without RAID functions, you don't have to make a SATA / SATAII
driver diskette. Besides, there is no need for you to change the BIOS setting. You
can start to install Windows 2000, Windows XP or Windows XP 64-bit on your
system directly.
2.10
2.10
2.10
2.10
2.10 Installing Windows 2000 / Windows XP /
Installing Windows 2000 / Windows XP /
Installing Windows 2000 / Windows XP /
Installing Windows 2000 / Windows XP /
Installing Windows 2000 / Windows XP /
Windows XP 64-bit With RAID Functions
Windows XP 64-bit With RAID Functions
Windows XP 64-bit With RAID Functions
Windows XP 64-bit With RAID Functions
Windows XP 64-bit With RAID Functions
If you want to install Windows 2000, Windows XP or Windows XP 64-bit on your
SATA / SATAII HDDs with RAID functions, please follow the below steps.
Before installing Windows 2000 to your system, your disk is supposed to
include SP4. If there is no SP4 included in your disk, please visit the below
website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/
spdeploy.htm#the_integrated_installation_fmay
STEP 1: Make a SATA / SATAII Driver Diskette.
A.
Insert the ASRock Support CD into your optical drive to boot your system.
B.
During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-
ROM as the boot device.
C.
When you see the message on the screen, "Do you want to generate
Serial ATA driver diskette [YN]?", press <Y>.
D.
Then you will see these messages,
Please insert a diskette into the floppy drive.
WARNING! Formatting the floppy diskette will
lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press <Y>.
E.
The system will start to format the floppy diskette and copy SATA /
SATAII drivers into the floppy diskette.
STEP 2: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATAII Operation Mode" option from [non-RAID] to [RAID].
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
ASRock K8NF4G-SATA2 Motherboard
Advanced screen
IDE Configuration.
1 7
1 7
1 7
1 7
1 7
Tabla de contenido
