Haiku FR127A-A2 Guia De Instalacion página 29

Install Wiring Cover and Trim
6
Raise the wiring cover, allowing about a 1/8" (3 mm) gap at the ceiling. Align the mounting slots with the screw holes on the extension
tube, and secure it with the wiring cover screws.
Slide the trim up the extension tube, aligning the tabs on the inside with the slots on the bottom of the wiring cover. Twist clockwise to
snap the trim into position (Fig. 6).
Fig. 6
Wiring Cover
Screw
Screw
Wiring Cover Trim
27
HAIKU® BY BIG ASS FANS