Initial Setup; Operation; Storage; Loading The Filling Station - CEMO DT-Mobil PRO PE 980 Premium Manual Del Usuario

4. Initial setup

1. Affix the stickers enclosed with the tank
documents permanently and firmly to the tank.
A
B
C
Labelling DT-Mobile PRO PE on both sides
(front and rear)
A
UN 1202 for diesel
Hazard label
B
(flame on red background)
environmentally hazardous
C
substances (tree - fish)
2. Fill the tank (see section 5.4).
Unscrew cap from filling connection b.
The container is filled using a delivery nozzle
with an automatic shut-off.
3. Perform a test filling as described in section 5.5,
but hold the automatic delivery nozzle h in the
still open filling opening b.
4. After completing the test filling, close the filling
opening tight using the cap.
►
The filling station is now ready for operation.

5. Operation

5.1 Storage

Do not expose the DT-Mobile to direct sunlight for
extended periods either during transport or when in
storage. Excessive heating can degrade the quality
of the high-grade plastic container.
If heating produces overpressure in the sealed
container, this overpressure will be released via
the safety valve e .
Suitable storage conditions:
• ambient temperatures from - 10 °C to + 40 °C.
• level surface.
• canopy for storage outdoors

5.2 Loading the filling station

Risk of injury!
The lid must be closed.
Important!
i
Close ball valve of the delivery line c
GB
33