THE POWErmaT "HaNdSHakE"
When a Powermat enabled device is properly positioned on a
Powermat Mat, an automatic "handshake" process will take place
during which the Powermat Mat will recognize the Powermat
Receiver and activate the Powermat Access Point. (NOTE:
Non-enabled devices will not cause activation.) This process
ensures that the proper power is given to your device. Also, this
communication allows the Mat to stop delivering power when the
device is fully charged, saving energy.
NOTE: The light may come on and go off after approximately fifteen
(15) seconds if the mat confirms that a device is fully charged.
PRODUCT SPECIFICATIONS
• Operational Temperature 32° – 104°F (0° - 40°C)
• Humidity Range 0% - 90% non condensing
• Use only with certified Powermat charging surfaces
Any portable electronic device that has been enabled with a
product-specific Powermat Receiver can be charged using the
Powermat Mat. As new Powermat Receivers become available,
we will post the information to our website (www.powermat.com).
Please feel free to check our website for updated information as
frequently as you wish.
9
TrOUBlESHOOTING
Problem
Solution
My electronic device is
Confirm that you have followed the set-up
not charging
instructions and that the Powermat Mat is
properly plugged into an electrical outlet and
the DC plug is inserted into the mat.
Make sure that you have properly installed
your Powermat Receiver for HTC EVO 4G.
Verify that your handheld device is properly
positioned on the Powermat Mat and that
the indicator lights are lit, indicating that a
connection has been made between the Mat
and your enabled device
Please note that if the device is not charging
this may indicate that the device has been
fully charged and no further charging is
needed.
NOTE: Devices that have not been enabled
with a Powermat Receiver will not activate.
The indication light is
If the indication lights fails to glow at all, a
not lit
proper connection between the Powermat
Mat and your device has not been made.
10