TECshow DOME CORE 240 Manual De Usuario página 4

3. FRONT PANEL & REAR PANEL
1. Power switch
2. Controls for adjusting MIC input level.
3. Control for adjusting LINE input level.
4. Controls for adjusting the built-in MP· player
input level.
5. Controls for adjusting two-band equalizer.
6. This control adjust the final ouput level.
7. Output signal level indicator.
8. Two-color power status indicator. These two-
color LEDs indicate the power supply status and
the built.in amplifier status.
• Blue: Normal working condition.
• Blue and Red flash: The room temperature
is too high o the input signal is too larg or
Speaker audio impedance is less than the rated
impedance.
• Red: Over current protection or high
temperature protection.
• No light: Failure
9. Control for adjusting 2 or 4 section distributing
level. Notice: before a adjust Distribution Volume,
must turn MASTER to "0" first. It is strictly
forbidden to adjust this 6-band knob when the
Volume control is not closed. Otherwise it will
damage the unit.
10. MIc input coonectors (MIC1 is priority
Microphone).
11. SD Card Socket: This socket is used for plug
SD card, the Buit-in Music player can play the
P. 4
Tecshow Dome Core 240 | English version
music in the SD card directly.
12. USB Port: This USB port is used for plug PEN
Driver, the Built-in Music player can play the
music in the PEN Driver directy.
13. LCD Display: Used for display the current status
of the Built-in music player.
14. Built-in Music Player controller: These buttons
used for control the Built-in Music Player.
MODE: Short press - Used to choose the machine´s
working mode, the working mode cycling according
to the orther "FM, Bluetooth, MP-3".
Short press - To next song. Long press - to
increase volume. In FM mode: Short press - to Next
radio stations.
Short press: To Previus Song. Long press:
To lower the volume. In FM mode: Shrot press: To
Previus radio stations.