Attaching Display With Vesa 100 Mounting Pattern - peerless-AV SGLS01 Manual De Instalación

Attaching Display with VESA 100 Mounting Pattern

• If screws don't get three complete turns in the display inserts or if screws bottom out and hook plate is still not tightly
secured, damage may occur to display or product may fail.
10
Choose hole pattern as shown in fi gure 10. Attach
hook plate (B) to back of display using four M4 x
12 mm screws. Tighten screws using a phillips
screwdriver.
fi g 10
M4 X 12 MM SCREWS
Insert two 1/4-20 x 12 mm screws (L) into holes indicated below for desired display orientation. Tighten all screws
12
using 4 mm allen wrench (R).
No Tilt
WARNING
B
L
2° Backward Tilt
11 of 35
11
Attach hook plate (B) to display mount bracket (A).
L
ISSUED: 07-28-06 SHEET #: 202-9156-15 (2014-04-09)
All other brand and product names are trademarks or registered trademarks of their respective owners.
B
A
L
5° Forward Tilt
© 2014, Peerless Industries, Inc. All rights reserved.