Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CHANNEL ASSIGNMENT
When using a Digital Audio Workstation on
a PC, and within the included Phonic Firefly
302 USB control panel software, the following
names have been attributed to the input chan-
nels of the Firefly.
Firefly Channel
Channel Name
Analog In 1
1/4" and RCA Analog Input 1
Analog In 2
1/4" and RCA Analog Input 2
Mic In
Microphone Input
Mic In
Microphone Input
S/PDIF In
S/PDIF Input
S/PDIF In
S/PDIF Input
Midi In
MIDI Input
If you would like to use the Firefly 302 USB as
your default audio output device on your PC,
simply go into the Windows control panel and
select "Sound and Audio Devices." Select the
Audio tab, and use the pull-down menu to se-
lect one of the Firefly 302 USB's inputs from the
list of available output devices. The Firefly 302
USB can also be selected as the default output
device for individual programs by editing said
programs' settings / options.
Firefly 302 USB
OPERATING
SOFTWARE
After successfully completing the installation
process, the following process must be fol-
lowed to work efficiently with the Firefly 302
USB. In the following example, we are using
Cubase - however most other software should
be similar.
1. Open the program.
2. Go to the 'Devices' pull-down menu and select
'Device Setup'. On the left, select 'VST Mul-
titrack'.
3. From the ASIO Driver drop-down list select the
'Firefly302USB ASIO Driver'. A pop-up box
will ask you if you want to switch to the ASIO
driver. Click 'Switch'. This completes the basic
setup.
4. The following steps should be followed to acti-
vate audio tracks received from or sent by the
Firefly 302 USB.
a. Go to the "devices" pull-down menu and
select 'VST Inputs'. This will display the
various inputs ("Analog In 1", "Analog In
2", etc.)
b. Activate channels by clicking the "Ac-
tive" button located next to each channel
name.
5. For further instructions on the operation of Cu-
base, please consult the owner's manual by
pressing F1 while the program is open.
If you wish to reset the Firefly ASIO driver, sim-
ply go to the 'devices' pull-down menu and select
'device setup'. Simply click 'reset' and select the
'Firefly302USB ASIO Driver'. Click 'ok' to continue
and the Firefly 302 USB should once again be-
come functional.
WITH
DAW
15
Tabla de contenido
