Zoom Function; Quality Of The Signal; Using The Remote Control Unit - Extel WESV 82500 Instrucciones De Uso E Instalación

h. Zoom function
Press the button
mera.
You have the possibility to move the zoomed video with the arrow buttons qpt u of the
remote control unit or the monitor.
Press again the button
i. Quality of the signal
The reception quality is represented by bars at the right side of the antenna symbol on the
left upper corner of the screen. The higher the number of bars, the better signal quality.
See table below.
Level of signal
Very good
Good
Medium
Low
Absent
j. Using the remote control unit
of the remote control unit to zoom in the video of the selected ca-
of the remote control unit to return to the initial video.
Display
1062~1280Kbps
725~1062Kbps
543~725Kbps
250~543Kbps
- For the first use, remove the protection tab from the battery
- Battery type: One CR2025 3V alkaline lithium battery (battery
included).
ON/OFF functions press the button
monitor.
- The button (ok) enables to validate
- The arrow buttons qpt u enables in "ZOOM MODE" to aim
the camera.
- The button
- The button enables to change the camera displayed or to pass
to quad mode.
CFI EXTEL WESV 82500 - 06/2009 - V1
Flow VGA FPS
5~10Fps
0~250Kbps
enables to zoom in the video.
QVGA FPS
15~30Fps
3~5Fps 12~20Fps
2~4Fps 8~15Fps
0~1Fps 0~4Fps
0Fps
to switch on or off the
0Fps
13GB