After Treatment; Cleaning And Maintenance - Remington Compact CONTROL HPL IPL3500 Manual De Instrucciones

YOU ARE NOW READY TO USE YOUR DEVICE
1. Before treating an area, the skin should be shaved, clean, dry and free of any powders,
antiperspirants or deodorants. Do not wax, pluck or tweeze the hair out.
2. Press the control button. The device will turn on, the level 1 energy indicator light will
be on, and a fan sound will start.
3. Approximately 1 second after pressing the control button, the ready light will turn on.
The device is then ready to use at the lowest energy level.
4. Set the energy level by pressing the control button repeatedly to increase the energy
level until you have the level you want. The energy level indicator lights indicate the
chosen setting (refer to section ENERGY LEVELS).
5. Decide if you wish to treat the area by Gliding or Pulsing (refer to section PULSING AND
GLIDING).
6. Apply the treatment window to the skin. Make sure that the skin is spread evenly and
smoothly. When the treatment window is in full contact with the skin, the ready light
will start blinking slowly.
7. The device will first determine the colour of your skin automatically and it will flash a
pulse of light onto your skin. You will feel a mild sensation of warmth and tingling, and
you may hear a popping sound.
• If you are pulsing, remove the device from your skin. The device will immediately
recharge for the next pulse. After a few seconds (depending on the energy level)
the ready light will turn on again, and start blinking slowly when pressed against
the skin.
• If you are pulsing, repeat the process. If you are gliding, simply continue. Continue to
pulse or glide until you have treated the area fully.
• Stop use immediately, if your skin blisters or burns.

AFTER TREATMENT

When you have finished your treatment session:
1. Turn the device off by giving the control button an extended press. Remember the last
energy level setting you used, because it will not be restored when you turn the device
on again.
2. Remove the adapter from the electrical outlet.

CLEANING AND MAINTENANCE

It is important to clean your device after each treatment.
1. Unplug the device.
2. To clean the device including the treatment window, wipe with a clean, dry cloth. Never
use acetone or other abrasive fluids, because they will damage your device.
3. After cleaning, we recommend you store the device in its original box.
• Never immerse your device or any of its parts in water.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
9