Enlaces rápidos
ATEX
Certification numbers:
IECEx
WNI ATEX
SW-HHP ATEX
IECEx SIR 16.0041X
IECEx SIR 15.0072X
Ex ia II C T4 Ga
Sira 16ATEX2108X
Sira 15ATEX2196X
WNI - Atex Wireless
Compression Load Cell
ﺗﻌﻠﻳﻣﺎﺕ ﺍﻟﺗﺷﻐﻳﻝ
Part No:
SU3593
Issue 2
THIS MANUAL WAS WRITTEN IN THE ENGLISH LANGUAGE AND PROFESSIONALLY
TRANSLATED TO ALL OTHER LANGUAGES CONTAINED WITHIN THIS DOCUMENT.
PLEASE NOTE THAT STRAIGHTPOINT ACCEPT NO RESPONSIBILITY FOR ANY ERRORS OR
OMISSIONS.
Manuales relacionados para Crosby WNI Atex
Resumen de contenidos para Crosby WNI Atex
- Página 1 ATEX Certification numbers: IECEx WNI ATEX SW-HHP ATEX IECEx SIR 16.0041X IECEx SIR 15.0072X Ex ia II C T4 Ga Sira 16ATEX2108X Sira 15ATEX2196X WNI - Atex Wireless Compression Load Cell ﺗﻌﻠﻳﻣﺎﺕ ﺍﻟﺗﺷﻐﻳﻝ Part No: SU3593 Issue 2 THIS MANUAL WAS WRITTEN IN THE ENGLISH LANGUAGE AND PROFESSIONALLY TRANSLATED TO ALL OTHER LANGUAGES CONTAINED WITHIN THIS DOCUMENT.
- Página 3 Manufacturer: Straightpoint Ltd, Unit 9, Dakota Park, Downley Road, Havant, Hampshire, PO9 2NJ, Product: Wireless Compression Loadcell WNI-ATEX Product Description: Intrinsically safe heavy duty compression load cell for both weighing and load monitoring in hazardous environments; such as on and offshore oil, gas and chemical industries in zones classified 2,1 and 0.
- Página 4 General description and warnings 01-04 Atex/IECEx certification markings 05-08 09-10 WNI Atex fitting batteries WNI Atex radio emissions 12-13 WNI Atex using a load cell 14-15 Product aftercare Service and calibration Warranty Part No: SU3593 Issue 2...
- Página 5 All products manufactured and sold by Straightpoint Ltd, are sold with the express understanding that the purchaser and user are thoroughly familiar with the safe use, proper care and application of the product. Responsibility for the safe use, proper care and application of the product rests with the user. Failure of the product can occur due to misapplication, abuse, overloading, or improper care and maintenance.
- Página 6 Todos los productos que fabrica y vende Straightpoint Ltd se venden sabiendo explícitamente que el comprador y el usuario son plenamente conocedores de utilizar el producto de forma segura, cuidarlo y emplearlo. El usuario es responsable de utilizarlo de forma segura, cuidarlo y emplearlo. El mal funcionamiento del producto puede deberse a un uso indebido, abuso, sobrecarga, o cuidado y mantenimiento inadecuados.
- Página 7 Straightpoint Ltd Straightpoint Ltd : ASME B30.26-2010 « ». Straightpoint Ltd, Straightpoint Ltd Straightpoint Ltd. Straightpoint Ltd Straightpoint Ltd Όλα τα προϊόντα που κατασκευάζονται και πωλούνται από τι Straightpoint Ltd, πωλούνται ε τη ρητή επιφύλαξη ότι ο αγοραστή και ο χρήστη είναι πλήρω εξοικειω ένοι ε την ασφαλή χρήση, την κατάλληλη φροντίδα και την εφαρ ογή του προϊόντο . Η...
- Página 8 Alla produkter som tillverkas och säljs av Straightpoint Ltd säljs med uttryckliga hänvisningar om att köparen och användaren har god kännedom om säker användning, skötsel och tillämpningen av produkten. För säker användning, skötsel och tillämpningen av produkten ansvarar användaren. Felaktig användning, missbruk, överbelastning eller felaktig skötsel och underhåll kan leda till att produkten fördärvas. Det finns många statliga standarder och branschstandarder som omfattar produkterna som tillverkas och säljs av Straightpoint Ltd .
- Página 9 Unit 9, Dakota Park, Havant, UK PO9 2NJ Model : WNI-ATEX Ex ia IIC T4 Ga -10°C ≤Ta≤ +50°C SIRA 16ATEX2108X IECEx SIR16.0041X USE L91 Energizer Lithium Ultimate AA type batteries only 2813 IP67 WARNING: Do not Replace Battery when an explosive atmosphere is present.
- Página 10 Besondere Anleitungen für Montage in Gefahrenzonen (gemäß IEC 60079-0:2011 Satz 30). Die folgenden Anleitungen für den sicheren Gebrauch in Gefahrenzonen beziehen sich auf Geräte mit der Zertifikatnummer IECEx SIR.16.0041X und SIRA 16ATEX2108X. 1. Die Zertifizierungsbezeichnung ist wie oben 2. Das Gerät kann in Bereichen 0, 1 und 2 mit entzündlichen Gasen und Dämpfen, Gerätegruppen IIA, IIB und IIC sowie bei Temperaturklasse T4 verwendet werden.
- Página 11 Besondere Anleitungen für Montage in Gefahrenzonen (gemäß IEC 60079-0:2011 Satz 30). Die folgenden Anleitungen für den sicheren Gebrauch in Gefahrenzonen beziehen sich auf Geräte mit der Zertifikatnummer IECEx SIR.16.0041X und SIRA 16ATEX2108X. 1. Die Zertifizierungsbezeichnung ist wie oben. 2. Das Gerät kann in Bereichen 0, 1 und 2 mit entzündlichen Gasen und Dämpfen, Gerätegruppen IIA, IIB und IIC sowie bei Temperaturklasse T4 verwendet werden.
- Página 12 Instruksjonene som gjelder for installasjoner i eksplosjonsfarlige områder (i henhold til IEC 60079-0: 2011 klausul 30). Følgende instruksjoner er relevante for sikker bruk i eksplosjonsfarlige områder gjelder utstyr som dekkes av sertifikatnummer IECEx SIR.16.0041X og SIRA 16ATEX2108X. 1. Sertifiserings-merking er som ovenfor. 2.
- Página 13 IN A SAFE AREA ONLY, remove the side cover of the Wireless Compression Load Cell using a flat blade screwdriver. Fit batteries and refit cover. The Wireless Compression Load Cell may be connected to the Straightpoint SW-HHP ATEX handheld, in hazardous areas, or to our range of load monitoring software that is not covered in this manual.
- Página 14 Verwijder de achterkant van de Wireless Compression Load Cell met een schroevendraaier met platte kop. DOE DIT ALLEEN IN EEN VEILIGE OMGEVING. Plaats de batterijen en sluit de achterkant weer. De Wireless Compression Load Cell kan in een gevaarlijke ruimte worden aangesloten op een Straightpoint SW-HHP-handscanner of op onze software voor het meten van belasting.
- Página 15 Front 500m/1640ft Direction of radio signal Part No: SU3593 Issue 2...
- Página 16 When positioning the Wireless Compression Load Cell it is important to ensure that the load cell is correctly done so in relationship to where the receiving device is located. Note the direction of the wireless signal in the diagram on the opposite page. If you are using your wireless compression load cell with a SW-HHP Atex - see user manual SU3558.
- Página 17 Place the load cell on a base plate or surface that is sufficiently strong enough to withstand the load applied. This mounting surface should be flat, smooth and level. The top of the load cell is domed; packing plates or a load cap may be required to protect the item being loaded on to the load cell. Placez la cellule de charge sur une embase ou une surface suffisamment solide pour supporter la charge appliquée.
- Página 18 These devices are sealed to IP67/NEMA6 standards. The effects of solvent on the device can not be guaranteed, and should therefore be avoided. Avoid use within 20-30 minutes of rapid changes in temperature, for example moving the device from a cold vehicle into a warm room. The change in temperature can affect the accuracy of the device.
- Página 19 IP67/NEMA6. 20-30 +50°C ( 14 122°F). «OVERLOAD» Οι συσκευέ αυτέ σφραγίζονται σύ φωνα ε τα πρότυπα IP67/NEMA6. Η επίδραση διαλύτη στη συσκευή δεν είναι εγγυη ένη και θα πρέπει επο ένω να αποφεύγεται. Αποφύγετε τη χρήση εντό 20-30 λεπτών γρήγορων εταβολών θερ οκρασία , για παράδειγ α, ετακινώντα τη συσκευή από ένα παγω...
- Página 20 These products are supplied with a certificate of calibration which is valid for one year. After this date, it is recommended the device is recalibrated by Straightpoint or an approved calibration laboratory. Contact the Straightpoint service department or your supplier for more information. In the unlikely event of this device failing, fit new batteries and re-test.
- Página 21 Straightpoint (UK) Ltd warranty this product against malfunction for a period of one year from manufacture. Conditions of warranty: 1) The equipment is used as described exactly in the operators manual supplied. 2) Whilst we make every effort to ensure each device is calibrated before despatch, Straightpoint (UK) Ltd do not accept responsibility for inaccurate readings indicated by this equipment. 3) In the event of malfunction, the device is returned to the manufacturer: Straightpoint (UK) Ltd, Unit 9 Dakota Park, Havant, Hampshire, UK, PO9 2NJ.
- Página 22 Crosby | Straightpoint Unit 9, Dakota Park, Downley Road, Havant, Hampshire, PO9 2NJ UK · Tel: +44 (0)2392 484491 2801 Dawson Road, Tulsa, OK 74110 · USA · Tel: +1 (918) 834-4611...