The Controls Of Your Wine Cooler; Setting The Temperature - Danby Designer DWC110BLSRH Manual Del Usario

The Controls of
Your Wine Cooler
1 2
LIGHT
POWER
PUISSANCE LAMPE
1. Power on/off switch.
2. Interior lights on/off switch (while the door
stays closed).
3. Run: Indicator light illuminates to signify that
the cooling mode is currently in operation.
4. Upper chamber display: Display screen
shows current cabinet temperature and set
temperature of the upper zone.
5. Lower chamber display: Display screen
shows current cabinet temperature and set
temperature of the lower zone.
Setting the
Temperature
I M P O R TA N T !
In the event of a power fail-
ure, wait 3 to 5 minutes
before restarting.
Operating Instructions
4
3
Upper chamber
RUN
Activation
CHAMBRE SUPÉRIEURE
• To switch the display between
the Fahrenheit (°F) and Celsius
(°C) scale, depress the 'Set
Upper' and 'Set Lower' control
buttons simultaneously
approximately five (5) seconds.
• The temperature range can be
set as low as 39°F (4°C) or as
high as 64°F (18°C) to suit your
specific wine storage require-
ments. Each depression of the
'Set Upper' or 'Set Lower' button
will allow you to adjust the tem-
perature in 1° increments within
the aforementioned range.
5
Lower chamber
CHAMBRE INFÉRIEURE
6. °C/°F: Adjacent indicator light denotes which
scale of temperature is displayed.
7. 'Set Upper' button: Used to set the
temperature in the upper zone (see 'Setting
the Temperature' below).
'Set Lower' button: Used to set the
temperature in the lower zone (see 'Setting
the Temperature' below).
• You may view your 'set' tem-
perature at any time by briefly
depressing either the 'Set Upper'
or 'Set Lower' button. The set
for temperature will flash in the dis-
play area for 5 seconds before
the display resumes showing the
current cabinet temperature.
7
7
6
Set Upper
REGLER SUPÉRIEURE
Set Lower
REGLER INFÉRIEURE