Redialing A Number In Outgoing History; Dialing A Number In Incoming History; Dialing A Number In Incoming Missed Call History; Dialing A Number In The Phone Book - Alpine eX-10 Manual De Operación

5
Press .
Select the telephone number and dial.
If /ENTER is pressed, the selected name or the
telephone number is displayed. If
again, the telephone will be called.
■ Display example
1
1 Mode display
2 Call time
3 Receiving Volume
• The names registered in the telephone book are displayed. If the
name is not registered, a number is displayed. If both name and
number cannot be displayed, "------------" will be displayed.
• If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.

Redialing a Number In Outgoing History

Previously dialed telephone numbers are stored in dialed calls history.
You can redial a number by searching from dialed calls history.
Setting item: Dialed List

Dialing a Number In Incoming History

Telephone numbers from received calls are stored in the Received List.
You can redial these numbers by searching here.
Setting item: Received List

Dialing a Number In Incoming Missed Call History

Telephone numbers for received calls that are missed, are stored in the
Missed List. You can redial these numbers by searching here.
Setting item: Missed List

Dialing a Number In The Phone Book

Up to 1,000 telephone numbers are downloadable from a mobile phone.
Dial a call by selecting a person from the phone book list.
Setting item: Phonebook / Phonebook (SIM)
• If a name cannot be obtained via the phonebook, nothing is
displayed.
• The order of the list display depends on the design of the mobile
phone.
• If the call history or phonebook of the mobile phone is added or
deleted while it is connected to the unit, the list displayed on the unit
may not be brought up to date. If it is not updated, you cannot
correctly place a call.
12
-EN

Voice Dial Operation

/ENTER is pressed
You can call the telephone by performing voice operation.
1
2
2
• You can perform this operation only when a voice dial compatible
• If a called person that you say is not found, "No Call" is displayed
3
• Voice dial operation depends on the function of the mobile phone.
• If you place a call via voice dial, you cannot display a phone number
Adjusting the Volume when receiving a
Call
Set the receiving volume while calling.
1
• When the call is finished, return to the volume level you previously
Press and hold for at least 2 seconds.
The speak mode is activated, and "Speak" is displayed.
Say the telephone number, name you want to call
into the unit.
mobile phone is connected. If the mobile phone is not compatible
with the voice dial, "No Support" is displayed for 2 seconds.
for 2 seconds.
For details, refer to the Owner's Manual of the mobile phone.
or name.
While calling, press
Each press will adjust the volume during a call.
Level1 Level2 Level3
set in the SETUP mode. Refer to "Adjusting the volume (HFP
Volume)" (page 14).
to adjust the volume.
Level4 Level5 Level1