Perlesmith PSCMF1 Manual De Usuario página 7

2A-3
Level
Install wall plate
Tighten the lag bolts
STEP 2B
Wall Plate Installation (Wood stud)
CAUTION:
● Drywall covering the wall must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
CAUTION:
Avoid potential personal injury or property damage! All lag bolts
MUST BE firmly tightened to prevent unwanted movement of the wall plate
CAUTION:
Ensure the wall plate is securely fastened to the wall before continuing
on to the next step.
2B-1
UP
01
using lag bolts
01
until they are pulled firmly against the wall plate
A
and washer
A B
Locate the studs that form the
corner. Verify and mark the
center of the studs by finding
the stud edges using an awl, a
thin nail, or an edge-to-edge
stud finder.
Concrete Wall
D
Concrete Wall
and anchor .
D
01
.
01
.
A
P6