Miniland super 6 Manual De Instrucciones página 20

ENGLISH
The heating plate has white spots
and/or the coating is peeling
The screen flashes and emits
an alarm
The appliance has reduced
heating efficiency
The equipment works but it
doesn't heat up
Other incorrect operations
6. MAINTENANCE
6.1. CLEANING
Follow the instructions below:
1. Always turn off the device and unplug it before cleaning.
2. Discard the remaining water from the heating plate (6).
3. Use a damp cloth to clean the sterilizer.
4. Do not immerse or use water or other liquids to clean the electrical body (8), the cord or the
power plug (7).
5. Use a soft cloth to clean the screen (9).
6. The bottle basket (5), the accessory tray (4), the covers (2 and 13) and the egg holder (15) can
be easily washed in the dishwasher or with hot soapy water.
IMPORTANT: Do not use abrasive cleaning products, chemical solvents or sharp tools to clean the
sterilizer.
6.2. ELIMINATING LIME DEPOSITS
It is advisable to remove lime deposits from the heating plate (6) every four weeks to ensure that it
continues to function effectively.
1. Pour a mixture of 200 ml of hot water and 100 ml of white vinegar onto the heating plate.
2. Leave it to soak until the lime residue has dissolved.
3. Then empty the container, rinse it and wipe it with a damp cloth.
4. If after this process the lime deposits have not been completely eliminated, repeat the steps in
this section.
NOTE: Instead of white vinegar, you can also use citric acid descalers, following the manufacturer's
instructions. Do not use other types of water softeners.
7. TECHNICAL SPECIFICATIONS
• Voltage: 220-240V CA.
• Frequency: 50 – 60Hz.
• Consumption: 600W.
8. PRODUCT RECALL INFORMATION
This product must be disposed of responsibly. Do not throw away products with a crossed
out trashcan symbol with the normal household waste. Once their useful life is over, these
products should be discarded at a designated collection and treatment center. You can also
contact the establishment where you purchased the product.
The accumulation of lime is normal, particularly in hard
water areas. Remember to clean the unit regularly, as
indicated in section 6
There is not enough water on the heating plate. Add water
and restart the process
Check for limescale residue on the heating plate. Clean
the plate following the instructions in section 6 until normal
functioning resumes
Contact Miniland technical support
20