Idiomas disponibles
Idiomas disponibles
EN
How to use?
4.Match the transmitter and the receiver all over again.
Red indicator
Green indicator/the matching button
Turn on the transmitter and the receiver, and then press
the matching button on the receiver until the green light
flashes rapidly and continuously. Next, press the
matching button on the transmitter for over 2 seconds, if
both the green lights of the transmitter and receiver are
on, it means they're matched successfully.
Switch the working channel banks
The system divides the working frequency band into 4
channel banks so as to avoid mutual interference, each
pair occupy one channel bank while in use.
Tap the matching switch once, you can switch the channel
bank once, at the same time, the transmitter's red
indicator flashes, and the number of its flickering times
indicate the current channel bank.
★When the LED indicator flashes once, it means the first
bank; when the LED indicator flashes twice, it means the
second bank......
07
