Controls; Using The Controls - ROBBE POWER PEAK FN DUO POWER Manual Del Usaurio

POWER PEAK FUN DUO POWER
3. THE CONTROLS
SET
buttons
SELECT
button
Power
supply
lead, 12 V
3.1

USING THE CONTROLS

The four buttons on the Power Peak FUN DUO POWER are used to trigger different
actions according to the operating mode you have set.
MODE button
The 'MODE' button is used to select the process you wish to use: CHARGE, DISCHAR-
GE or 1 / 3 x DISCHARGE -> CHARGE. Pressing the 'MODE' button also interrupts any
process which is already running.
SELECT button
Pressing the 'SELECT' button carries out the menu selection, and calls up the individual
screen displays.
SET buttons
The 'SET' buttons are used to adjust the charge and discharge parameters. Pressing the
'INC' (increase) button increases the value in question, while the 'DEC' (decrease) button
reduces it. The same buttons are also used to change settings within menus.
The unit features a switchable Piezo buzzer which - if activated - provides an audible con-
firmation of every button-press, the end of the charge or discharge process, and any error
which might occur.
All buttons feature an auto-repeat function, i.e. holding the button pressed in has the
same effect as pressing the button repeatedly.
Operating instructions
Mains socket
on the back
panel
MODE button
24
Order No.
LCD screen
Battery output
sockets (Battery 1)
Battery out-
put sockets
(Battery 2)
BID socket
8468