Fast Printing - AKO -15740 Instrucciones De Instalación

Data printing (Only AKO-15742, 15752 and 15782)

Fast printing

When the logger is in any of the display modes, pressing the D key makes the device print the graphs of all the
active inputs, with the data logged in the last closed log block.
The data contained in each log block depend on the "log interval" parameter, as shown in the table:
If the parameter "Log start day" is set at "Monday" and the "Log interval" is set at "15 min." (default
configuration), the log block starts on Monday at 00:00 and closes on Sunday at 23:59.
Selective printing
When the logger is displaying the data for a specific date and input ("Graph", "List" or "Histogram" display
modes), when the D key is pressed, the device prints the data displayed on the screen.
When the logger is displaying the configuration change log or alarm log, when the D key is pressed, the device
prints the data displayed on the screen.
Connectivity
CAMRegis loggers have a port for connection of RS485 (MODBUS) data, that allow remotely managing them using
a PC with the SOFTRegis, AKONet software or an AKO-5011 server.
A different address must be assigned for each device in the same network, this address is defined using the
Configuration - Modbus Address parameter.
Recommended cable: AKO-15586
Tr-
Tr+
Gnd
LAN
Log interval
5 min.
15 min.
30 min.
CAMRegis
13 14 15
PC +
AKONet
AKO-5011
Period to be printed
24 hours
Last complete week
14 days
AKO controllers
with communication
AKO-80039
21
1575H031 Ed.03