Tabla de contenido
Idiomas disponibles
Idiomas disponibles
RANGE OF
APPLICATION
Your torque wrench
is only suitable for the
specified purpose.
Your torque wrench is
designed exclusively for
the controlled tightening
of bolts.
Any other additional
use of your torque wrench
is considered an abuse of
the specified purpose.
The company does not
accept liability for dam-
age incurred in this way,
nor will it, in this case,
accept any other claims
under the guarantee.
FUNCTIONAL UNITS
a Ratchet drive with
push-through, or inter-
changeable square
b Intermediate lever
c Spring
d Scale + graduated collar
lbf
in / lbf
•
•
e Handle
f Locking button
ft and N
m
•
TITAN
TITAN
SETTING THE TORQUE
Pictures 1 – 4
1
Pull out the locking
button on the end of the
handle.
2
Turn the handle in a
clockwise or anticlockwise
direction to set the torque.
Set the torque value to
5-10 % above the desired
value.
The set torque is read-
able on the scale or on
the scale connected to
the graduated collar*.
According to the
model, the scale or
graduated collar*
shows different pit-
ches. A table with the
respective divisions
can be found in the
section "DIVISIONS".
3
Now set the torque
value, previously set 5-10%
above the desired value,
back to the true value.
Please pay attention to
the unit of measure-
ment on the scale
applicable to you
(lbf
in / lbf
•
4
Push the locking
button back into the cavity.
*
According to the model!
7
ft or N
m).
•
•
Capítulos
Tabla de contenido
