Use Of The Product - Jimmy H8 Pro Manual De Instrucciones

Use of the product

Attn:
1.When use the product for first time, battery power
is not full. Need to charge the vacuum before using.
2.When battery capacity is lower than 20%,the
machine will automatially change to Eco mode, and
cannot run in max mode.
Charging
When the vacuum cleaner power is insufficient, charge
the vacuum cleaner in time ; When the voltage is too
low, to protect the battery, vacuum cleaner will be
automatic power-off, at this time the vacuum cleaner
need to be charged. When charging, assemble battery
pack to machine, plug the charger connector into the
A/C power socket and another end to vacuum cleaner
to start charging. When the handheld vacuum cleaner
LED display shows an increase in power, it indicates
that the vacuum cleaner is charging. When charging is
completed, LED display show 100% power.(Fig 10)
Attn:
1.After charging, please pull the charger plug off power
socket and stop charging.
2. If power cord is damaged, to avoid danger, itmust be
replaced by a professional people of the manufacturer,
repairing agent or similar department.
Use of Handheld Vacuum Cleaner
Take the vacuum cleaner off the holder, press the on/
off button on the handle to start or stop of the vacuum
cleaner. When machine is turned on, it works in Auto
mode, press the power button to switch to Turbo
mode, press again to switch to Max mode and again
to switch to Eco mode. The vacuum cleaner working
mode switches in the sequence of Auto, Turbo, Max,
Eco mode through pressing mode button.(Fig 11)
Vacuum cleaner working mode:
Auto Mode: Adjusts power automatically according to
different floor type, suitable for all types of floor.
Turbo Mode: Suitable for short hair carpet
Max: Mode: Suitable for long hair carpet
Eco Mode: Suitable for hard floor like wooden floor, tile
etc.
6
10
11
12
14
13