Assembly Instructions
FIG.1
Attach the Legs (#4#5#57#58) to the Billiard Cabinet (#1) using four Bolts (#A46), four Nuts
(#A48) and eight Washers (#A47) per leg.
Attach the End Leg Braces(#6#59)to the Legs Using four Bolts(#A46),four Nuts (#A48)and eight
Washers(#A47) per End Leg Brace.
HELPFUL HINT: Be sure legs
#4.#5 and leg brace #59 are all
assembled together on the same
side of the table as shown.
Future assembly steps require
holes on these legs to be in a
certain position for correct
assembly. Legs #57, #58, and
leg brace #6 should also all be
assembled together on the
opposite side of table.
A47
A46
A47
A48
A47
A47
A56
A48
HELPFUL HINT:
A46
The main cabinet #1
must be in position
as shown in the
diagram with the
rivet plug hole close
to the left hand side
(near leg #4 as
shown in FIG 1).