Technical Specifications - Goalzero Boulder 30 Guia De Inicio Rapido

GET TO KNOW YOUR GEAR
PLUG IT
Plug directly into a Goal Zero Yeti Solar Generator.
SECURE IT
Use the bracket holes to secure the panel to a surface or to multiple Boulder 30 panels with Goal Zero Quick Clips.
POWER IT
When charging, connect the cable to the OUT port then into a Goal Zero product.
CHAIN IT
Using the included cable, connect the OUT port of one of the Boulder panels to the IN port of the next panel.
Bracket Holes
Use the bracket holes on the side of
your panel to hang the Boulder 30.
Also use them to link and stabilize
several Boulder 30 panels together
with Goal Zero Quick Clips.
Structure
The Boulder 30 can take a beating.
It is framed with durable aluminum
and covered in tempered glass.
Cable for Chaining or Charging
When in use, plug the cable into your Boulder 30 Solar Panel and
Goal Zero Solar Generator or use the cable to chain Boulder Solar
Panels. When storing wrap it up and secure it with the velcro fastener.
GETTING STARTED
1. Be sure to activate your warranty at goalzero.com/warranty.
2. Open and remove from box.
3. Position the Boulder 30 panel at an angle facing the sun (see below).
4. Connect your Goal Zero Yeti Solar Generators to start charging.
HOW IT WORKS
Chaining Port
Connect multiple Boulder
30 panels to power up
your device faster.
FREQUENTLY ASKED QUESTION
Q: Is the Boulder 30 waterproof?
A: Yes! The Boulder 30 is waterproof and rugged
terrain resistant. Just remember that the devices
you are powering might not be as durable.
Q: What Boulder 30 power packs can I use the
Boulder 30 with?
A: The Boulder 30 can be used to power any Goal
Zero power pack (some may require an adapter).
It is most effective with the Goal Zero Yeti Solar
Generators.

TECHNICAL SPECIFICATIONS

Boulder 30 Solar Panel
Goal Zero Sherpa 50
Goal Zero Yeti 150
Goal Zero Yeti 400
Solar Panel
Rated Power
Open Circuit Voltage
Cell Type
Ports
Solar Port (Blue, 8mm)
Male/Female
Goal Zero
Boulder 30 Yeti 400 Laptop
Solar Panel Solar Generator
Q: Can the Boulder 30 be chained with other
Boulder 30 Solar Panels?
A: Yes, you can chain up to four Boulder 30s.
Q: Does the Boulder 30 give a full 30 Watts?
A: It delivers up to 30 Watts of power, but the
angle of the panels and the cloud coverage can
impact its performance. Avoid the shade. It will
not work indoors.
Q: Will the Boulder 30 break?
A: Not easily. It was made to last, but try to avoid
heavy impact that can weaken the frame and
cause the glass to crack.
General
4-8 hrs
11-22 hrs Chainable
26-52 hrs Weight
Dimensions
30W
Certs
18-22V
Warranty
Monocrystalline
14-22V, up to 2A
(30W max)
Up to 4
6.5 lbs (2.95 kg)
21 x 18 x 1 in
(53 x 46 x 2.5 cm)
12 Months