Timer; Automatic Cooking - AIRLUX ATH320S Manual Del Usuario

Timer

The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 1 to 99 minutes) for each heating zone
•
Start timer
Action
Zone selection
Increase power
To select « Timer »
Decrease the time
Increase the time
The time is confirmed and the cooking starts until the time reaches [ 00 ].
•
Stop timer
Action
Zone selection
To select « Timer »
To stop the « Timer »
•
Automatic stop at the end of the cooking time :
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings.
To stop the sound and the blinking it is enough to press any key.
•
Egg timer function :
Action
Activate the hob
Select« Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings.
To stop the sound and the blinking it is enough to press any key.

Automatic cooking

All the cooking zones are equipped with an automatic "go and stop" cooking device. The cooking
zone starts at full power during a certain time, then reduces automatically its power on the
preselected level.
•
Start-up:
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
•
Switching off the automatic cooking:
Action
Zone selection
(for example « 7 »)
Power level selection
Control panel
press selection key
press key [ + ]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
press selection key
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Control panel
Press key [ ]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
press selection key
press key [ + ]
repress key [ + ]
press key [ - ]
Control panel
press selection key
press key [ - ] or [ + ]
21
Display
[ 0 ]
[ 1 ] to [ 9 ]
Timer [ 00 ] min
[ 00 ] wents to 30,29....
time increase
Display
[ 0 ]
The remaining time
[ 00 ] then stops
Display
[ 0 ] or [ H ]
Timer [ 00 ] min
[ 00 ] wents to 30,29....
time increase
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 9 ] is blinking with [A]
[ 9 ] wents to [ 8 ] [ 7 ]
[ 7 ] is blinking with [A]
Display
[ 7 ] is blinking with [A]
Level selected