Utilitech UT40C Manual De Instrucciones página 7

INSTALLATION INSTRUCTIONS
4 . Attach the monitor plate (B) to the flat panel TV:
a . Select the appropriate screw to use by inserting
the M4 x 12 (AA), M5 x 12 (BB), M6 x 12 (CC),
or M5 x 20 (DD) screws into the back of the TV in
order to determine the best fit.
b . Use M8/M5 adapters (HH) with M5 x 12 screws
(BB) or M5 x 20 mm screws (DD) if the TV has 8
mm inserts .
5 . Drill mounting holes in a wood stud .

Notee For concrete, proceed to step 7 .
a . Use a stud finder to locate and then mark the
edge and center locations of the wood stud .
b . Position the mounting arm (A) on the wall and use
a level to ensure that the mounting arm (A) will be
level on the wall .
c . Mark the two locations for the mounting holes .
Use a 3/16 in . (4 .8 mm) drill bit to drill two pilot
holes 2-3/4 in . (70 mm) deep .
6 . Attach the mounting arm (A) to the wall using the wall
screws (EE) . Ensure that the UP symbol and arrow
are pointing up and securely tighten the wood screws
(EE) using a Phillips screwdriver and/or 10 mm
socket wrench . Proceed to step 9 .
Hardware Used
EE Wall Screw
EE
x 2
7
4
AA
5
A B
C
6
A
Lowes.com
B
EE