Care And Maintenance; Cleaning Instructions - Utilitech D-7-H Manual Del Usuario

ASSEMBLY INSTRUCTIONS
3. Remove the nuts (C) preassembled to the
casters (F). Insert the top of the casters into the
holes on the pedals (D). Use the removed nuts
to secure the casters to the pedals.
4. Turn the assembled unit upright. Ensure
that the casters are installed correctly and are
level.
Place the heater only on a flat, stable surface.
Placing the heater on an incline can cause
damage to the unit and lead to hazardous
situations.
CAUTION
DO NOT OPEN OR REFILL/CHANGE OIL FINS.
OIL FINS ARE PERMANENTLY SEALED AND DO NOT REQUIRE REFILLING OR OIL
CHANGING. ATTEMPTING TO OPEN FINS WILL DAMAGE THE UNIT. THIS UNIT IS
FILLED WITH A NON-TOXIC MINERAL OIL.
3
4
Lowes.com
6
OPERATING INSTRUCTIONS
YOUR HEATER IS EQUIPPED WITH 3-CONTROL SETTINGS
AND THERMOSTAT
Power control: Turn to O position, the heater will be off; turn to I
position, the heater will be in low mode(600W); turn to II position,
the heater will be in middle mode(900W); turn to III position, the
heater will be in high mode(1,500W).
Thermostat control: Heat Output: To increase heat output, turn
the thermostat dial clockwise toward "HIGH." To reduce heat
output, turn the thermostat dial counterclockwise toward "LOW." To
heat a room quickly, turn the power switch down to I or II or III with
the thermostat dial at "HIGH." Once the desired room temperature
is reached, slowly rotate the thermostat dial counterclockwise until
the heater shuts off and you hear a "click". The thermostat will now
maintain the temperature by cycling the heater on or off. Once the
room is comfortable, select a lower power setting at either I and
O or II and O or III and O to reduce electrical consumption and
to prevent the room from becoming too warm. During particularly
cold weather, the low setting at I or II or III power setting(s) may be
in sufficient to satisfy the thermostat. Select I or II or III for these
periods. To turn off heater, press both switches down at the O.

CARE AND MAINTENANCE

PRE-CLEANING INSTRUCTIONS
1. Turn the power control switch to the 'OFF' position.
2. Disconnect the power cord from the electrical socket.

CLEANING INSTRUCTIONS

WARNING: Cleaning liquids or other chemicals, as fire, electrical shock, personal injury and
property damage can occur.
CAUTION: Do not use gasoline, benzene or thinner to clean your heater, as these chemicals can
cause surface damage.
1. Use a vacuum cleaner with a crevice tool to remove dust from the interior or your heater.
2. Use a clean, soft and lightly damp cloth to gently wipe the surface of the enclosure.
3. Allow the enclosure to dry completely prior to operating you heater.
OFF-SEASON STORAGE INSTRUCTIONS
1. Secure the power cord and place your heater in its original shipping container or a similar
container.
2. Store the container in a cool, dry location.
Lowes.com
7